, , ,

ElectroVoice PA2250T Dual 250 W/CH Power Amplifier

The Electro-Voice PA2250T is a rackmount 250W 2-channel power amplifier with a high-performance output transformer ideal for 50V/70V/100V systems or 4-/8-Ohm setups in schools, houses of worship, retail spaces, offices, and more. This amplifier has a simple, easy-to-use interface with the power switch and indicator LEDs on the front panel, while the stepped level controls and switches for the selectable 50/70/300 Hz high-pass filter and dual/parallel/bridged mode are on the rear. Euroblock input and output connectors are utilized for quick and easy setup.

Comprehensive protection circuitry protects your amplifier from damage caused by overheating, overloads, and short-circuit issues. The output has a delayed connection at power-up to prevent damage to your speakers. Variable-speed fans and a flow-through-chassis design direct airflow from front to rear, and keep the amplifier cool and running smoothly. Integrated rack ears allow direct mounting of the 2 RU enclosure in a standard 19″ equipment rack.

  • Rugged rack-mountable 2 RU housing with integrated rack ears
  • Choose to operate in dual mono, parallel, or bridged mono mode
  • 250W rated output power with low noise and distortion
  • Dual Euroblock Phoenix-type input connectors
  • 12-pin Euroblock output connector for 50V/70V/100V or 4/8 Ohms
  • Rear-panel volume control
  • Selectable high-pass filter at 50/70/300 Hz
  • Front-to-rear airflow for reliable operation
  • Protection circuitry for overheating, audio limiting, delayed output connection at power-up, and peak current limiting
  • Front-panel LEDs for power, signal, limit, and protect
  • Voltage selector for international use
Categories: , , ,
Add to Wishlist
Add to Wishlist
ElectroVoice PA2250T Dual 250 W/CH Power Amplifier
Height 3.46″ (88mm)
Width                    19.02″ (483mm)
Depth 15.98″ (406mm)
Weight Net 51.81lbs (23.5kg)
Frequency Response (-3 dB) 65Hz – 40kHz
Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz 250/125W (70V/100V-250)
Slew Rate 18V/µs (70V-41, 100V-61)
Channels 2
Intermodulation Distortion (SMPTE) < 0.1%
DIM 30 < 0.1%
Signal-to-Noise Ratio (A-weighted) 103dB
Input Impedance (Balanced) > 20kΩ
Input Sensitivity 0 dBu (775mV) (@ rated output power or voltage, 1kHz)
Number of Channels 2
Network Control (IRIS-Net) No
Amplifier Gain 34.3dB
Continuous Rated Power (1 kHz, THD 1%) 100v 270Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω 270Watts
Continuous Rated Power (1 kHz, THD 1%) 70v 270Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 100v 250Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 70v 250Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω 250Watts
Continuous Rated Power (1 kHz, THD 1%) 2Ω 270Watts
Impedance 4/8Ω (70V/100V)
Continuous Rated Power (1 kHz, THD 1%) 8Ω 135Watts
Crosstalk < < -75dB
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω 125Watts
Rated output power (*rated load) THD < 1%, 1kHz 270/135W (70V/100V-270)
Total Harmonic Distortion < 0.1%

 

Reviews

There are no reviews yet.

Be the first to review “ElectroVoice PA2250T Dual 250 W/CH Power Amplifier”

Your email address will not be published. Required fields are marked *

Related products

Shopping Cart