, , ,

Electro-Voice ZX1i 100T

Electro-Voice ZX1i 100T Overview ;

The white Electro-Voice ZX1i-100T is an 8″ 2-way weather-resistant passive loudspeaker offering high-performance, full-range sound reinforcement for indoor and outdoor installed applications in arenas, stages, and patios. The ZX1i-100T’s 8″ woofer and titanium high-frequency compression driver yield a 60 Hz to 20 kHz frequency response, and may be driven by a constant-voltage amplifier without low-frequency saturation thanks to the built-in 100W transformer with ASC (Automatic Saturation Compensation) technology. The high-frequency driver is mounted in a 100 x 100° horn for broad, even dispersion.

The input to the loudspeaker—provided by a removable 4-pin Euroblock connector—is fed to an internal crossover that properly distributes frequencies to the drivers. The lightweight ABS resin cabinet is outfitted with a heavy-duty QuickSAM mounting system, which enables fast and secure installation. With its molded enclosure design, two-layer grille, and IEC 529 and MIL-SPEC-810 ratings, the ZX1i-100T loudspeaker is built to withstand the stress of outdoor use.

  • Two-way, full-range passive loudspeaker for installed indoor/outdoor applications in event stages, restaurant patios, retail environments, and arenas
  • Weather-resistant to IEC 529 and MIL-STD-810 environmental specs
  • Ideal for 70V or 100V constant-voltage systems
  • Integrated 100W transformer with transformer bypass for use in 8-Ohm setups
  • Patented ASC (Automatic Saturation Compensation) technology prevents transformer saturation at low frequencies without requiring adjustment to the high-pass filter frequency as more speakers are added to the line, yielding consistent sound quality between the transformer-equipped and non-transformer ZX1i models
  • Transformer taps from 6.5 to 100 watts; rated power handling of 200 watts continuous (800 watts peak) in transformer-bypass mode
  • 8″ EV8L long-excursion, high-output woofer with a weatherized, treated cone delivers smooth low-frequency performance and reliability
  • Velocity-compensated port design overcomes the limitation of many small cabinet loudspeakers and enables enhanced low-frequency response
  • DH2005 compression driver with 1.25″ voice coil, titanium diaphragm, and 1″ exit
  • 100 x 100° horn coverage for broad, even dispersion
  • Internal crossover network preceded by a passive limiter for full-bandwidth overload protection
  • Removable 4-pin Euroblock connector
  • Injection-molded, high-impact ABS resin enclosure and powder-coated steel grille with hydrophobic cloth and acoustic foam protect the drivers from the elements
  • QuickSAM mounting system allows the installer to simply snap the speaker onto the bracket, then tighten it to the desired position
AB-ZE bracket kit (available separately) allows multiple units to be mounted together
Add to Wishlist
Add to Wishlist

Electro-Voice ZX1i 100T

SPECIFICATIONS

Frequency Response (-3 dB) 60 Hz – 20 kHz¹
Frequency Range (-10 dB) 48 Hz – 20 kHz¹
Rec. Hi-pass Frequency 40 Hz
Axial Sensitivity 94 dB (1W/1m)¹
Max Calculated SPL 123 dB
Coverage (H x V) 90 x 50
Rated System Power 200 W Cont.², 400 W Prog., 800 W Peak
LF Transducer EV8L, 203 mm (8 in) Driver
HF Transducer DH2005, 25 mm (1 in) Exit Compression Driver
Crossover Frequency 1.7 kHz
Nominal Impedance 8 Ω
Minimum Impedance 6 Ω
“T” Version Wattage Taps 70V – 6, 12.5, 25, 50, 100, 8 Ω by
p0V – 12.5, 25, 50, 100, 8 Ω bypass
Connectors 4-Pin Phoenix Connector
Enclosure Material ABS resin
Suspension Integrated QuickSAM Heavy-Duty Strong-Arm Mounting Bracket
Grille Polyester Powder Coated, 18GA Galvanized Steel
Dimensions (H x W x D) 451 mm x 282 mm x 263 mm (18 in x 11 in x 10 in)
Net Weight 8.4 kg (18.5 lb) without Transformer
10.4 kg (23.0 lb) with Transformer
Shipping Weight 10.2 kg (22.5 lb) without Transformer
12.3 kg (27.0 lb) with Transformer

Electro-Voice ZX1i 100T

Manual

zx1i PDF

Reviews

There are no reviews yet.

Be the first to review “Electro-Voice ZX1i 100T”

Your email address will not be published. Required fields are marked *

Shopping Cart