Shure BETA® 58A Dynamic Vocal Microphone

Shure BETA® 58A Dynamic Vocal Microphone

 Supercardioid Dynamic Vocal Handheld Microphone

The Beta 58A is a premium vocal mic ideally suited for professional lead and backup vocals, either on stage or in the studio. Big sound. Full sound. Sophisticated sound. Is your mic living up to the power of your vocal? For decades, the BETA® 58A has been through the wringer, pushing voice to the forefront on the biggest stages in the world. For sound that commands the attention of the entire crowd, this is your microphone.

Precise – Powerful – Presence

 

FEATURES

  • Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
  • Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound
  • Neodymium magnet for high signal–to–noise output
  • Hardened steel mesh grille that resists wear and abuse
  • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
  • Minimally effected by varying load impedance
  • Legendary Shure quality and reliability

 

Shure Product Benefits

On stage or in the studio, the BETA 58A is made for refined voice. The brightened midrange and bass roll-off give lead and background vocals a mighty presence in the mix. And the supercardioid pattern works harder to isolate your sound from every other source in the air. You could say it’s a singer’s best friend.

 

No worse for wear

The hardened steel mesh grille stands up to some of the roughest sweat drips, mic drops and van rides, without so much as a dent to show for it.

Out-louds the noise

The neodymium magnet provides higher output levels, so your sound is clear – and everything else stays in the background.

A worldwide star

The BETA 58A is a top-selling, single-element, dynamic microphone, and can be seen every night on stages all around the globe.

primary image BETA® 58A

How Does This Compare to the Legendary SM58?

Both are designed for vocal use and have a bright midrange and bass roll-off. The Beta 58A has increased sensitivity and high-end frequency response which results in a cleaner more detailed sound. It also features a supercardioid polar pattern compared to the SM58’s cardioid.

 

Specifications

Element Type Dynamic (moving coil)
Frequency Response 50 to 16,000 Hz
Polar Pattern Supercardioid
Sensitivity

at 1kHz, open circuit voltage

-51.5  dBV/Pa (2 .6  mV) [1]

Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Out Impedance EIA rated at 150  Ω (290  Ω actual)
Microphone Connector 3-pin, XLR-type
Housing

Silver blue enamel-painted die cast metal with hardened, matte-finished steel mesh grille

[1] 1 Pa=94 dB SPL

Dimensions 160mm (6.3 inches) = Length,  50mm (2 inches) = Diameter
Accessories Included  –
Net Weight 0.278 kg (0.62 lbs)
Shipping Weight 1.5 lbs (0.68 kg)
Categories , Brand:
Share This Items :

NATIONWIDE DELIVERY

Secure Delivery

AUTHENTIC PRODUCTS

100% Original Items

Description

The Beta 58A is a premium vocal mic ideally suited for professional lead and backup vocals, either on stage or in the studio. Big sound. Full sound. Sophisticated sound. Is your mic living up to the power of your vocal? For decades, the BETA® 58A has been through the wringer, pushing voice to the forefront on the biggest stages in the world. For sound that commands the attention of the entire crowd, this is your microphone.

Precise – Powerful – Presence

 

FEATURES

  • Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
  • Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound
  • Neodymium magnet for high signal–to–noise output
  • Hardened steel mesh grille that resists wear and abuse
  • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
  • Minimally effected by varying load impedance
  • Legendary Shure quality and reliability

 

Shure Product Benefits

On stage or in the studio, the BETA 58A is made for refined voice. The brightened midrange and bass roll-off give lead and background vocals a mighty presence in the mix. And the supercardioid pattern works harder to isolate your sound from every other source in the air. You could say it’s a singer’s best friend.

 

No worse for wear

The hardened steel mesh grille stands up to some of the roughest sweat drips, mic drops and van rides, without so much as a dent to show for it.

Out-louds the noise

The neodymium magnet provides higher output levels, so your sound is clear – and everything else stays in the background.

A worldwide star

The BETA 58A is a top-selling, single-element, dynamic microphone, and can be seen every night on stages all around the globe.

primary image BETA® 58A

How Does This Compare to the Legendary SM58?

Both are designed for vocal use and have a bright midrange and bass roll-off. The Beta 58A has increased sensitivity and high-end frequency response which results in a cleaner more detailed sound. It also features a supercardioid polar pattern compared to the SM58’s cardioid.

 

Specifications

Element Type Dynamic (moving coil)
Frequency Response 50 to 16,000 Hz
Polar Pattern Supercardioid
Sensitivity

at 1kHz, open circuit voltage

-51.5  dBV/Pa (2 .6  mV) [1]

Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Out Impedance EIA rated at 150  Ω (290  Ω actual)
Microphone Connector 3-pin, XLR-type
Housing

Silver blue enamel-painted die cast metal with hardened, matte-finished steel mesh grille

[1] 1 Pa=94 dB SPL

Dimensions 160mm (6.3 inches) = Length,  50mm (2 inches) = Diameter
Accessories Included  –
Net Weight 0.278 kg (0.62 lbs)
Shipping Weight 1.5 lbs (0.68 kg)

Reviews

There are no reviews yet.

Be the first to review “Shure BETA® 58A Dynamic Vocal Microphone”

Your email address will not be published. Required fields are marked *