Description
1U – 4 Channels with High Power
The D10.4 is very suitable for many medium-sized sonication tasks and monitor applications.
If you have little space in the rack and are looking for a powerfully good sounding amp, here is on the safe side. Excellent audio quality, high performance, light weight and an excellent price.
The power amplifiers of the D-Series are manufactured especially. Final assembly and quality control is carried out in our company.
For all budget-oriented users, the D-Series is the first choice and meets the industry standard with flying colours.
SPECIFICATIONS
| RMS 8 Ohm | 4 x 1300 W |
| RMS 4 Ohm | 4 x 2300 W |
| RMS 2 Ohm | 4 x 2500 W |
| RMS 8 Ohm bridge | Not possible |
| RMS 4 Ohm bridge | Not possible |
| Frequency response (+0/-0.3db,1W/8Ohm) |
20 Hz – 30 kHz lower than 0,3% |
| Separation bei 1 kHz | >75 db |
| Dynamics/signal to noise ratio | >105 db |
| Reception impadence | 20 kOhm |
| Boost | 40 db |
| Class | D |
| Inputs | 3-pin XLR, Balanced 4 x XLR Input |
| Damping factor | >800 (8Ohm20Hz-200Hz) |
| Speaker Output | 4 x Speakon Out |
| Protection circuits | Short-circuit, DC voltage, switch-off delay |
| Input | 1 V |
| Voltage | 130-265 V / 65-135 V |
| Cooling | from front to back |
| Width | 483 mm |
| Height (HE/MM) | 44 mm |
| Detph | 430 mm |
| Weight | 9,5 kg |
Reviews
There are no reviews yet.